1. 5bbl Kettle and Whirlpool.
1-1 Insulated 80mm.
1-2 SUS 304 inner tank 3mm, outside SUS 304 2mm.
1-3 Domed top with big size glass manway, LED light on the top of the tank, spray ball inside of the tank
1-4 PT100 temperature sensor at the side
1-5 Electriciry heated, 30KW. 220V,60HZ.
1-6 Level guage at the side
1-7 Drain outlet at the very bottom
1-8 Whrilpool Inlet for whirlpool
1-9 Four legs with levelling pads.
2. 5bbl Mash and Luter tun
2-1 Insulated 80mm
2-2 SUS 304 inner tank 3mm, outside SUS 304 2mm.
2-3 Domed top with big size glass manway, LED light on the top of the tank, spray ball inside of the tank
2-4 Sparging pipe inner top of the tank
2-5 Milled false bottom, easy to clean, and easy to take out
2-6 With rake design and motor
2-7 Level gauge at the side
2-8 Wort Recirculation inlet at the 2/3 top of the tank
2-9 Drain outlet at the very bottom.
2-10 Four legs with levelling pads
3. 10bbl Hot liquor tank
3-1 Insulated 80mm,
3-2 Heated by electricity, 30KW 220V, 60HZ.
3-3 Cone top with stainless steel manway.
3-4 Relief valve on the top
3-5 Level gauge
3-6 Drain outlet at the very bottom.
3-7 Four legs with levelling pads
4-1 two pumps, one is VFD wort pump. The other is HLT pump.
4-2 3 pcs beer hoses with TC connections for all the vessels and pumps.
4-3 All connections of the system are TC 1.5.
4-4 We will provide all vessels drawings before manufacture, without the confirmation for the buyer, we will not start manufacture.