Views: 4 Author: Site Editor Publish Time: 25-03-2021 Origin: Site
The 2000L craft beer project was shipped this week!
In addition to the conventional design for this project, we used many new designs, such as a fully automatic pneumatic valve control system, using Siemens procedures; using fully automatic liquid level switches, and so on.
The following are the main specifications of the whole set of equipment:
Product Details:
1. Conveying: screw conveying and flexible conveying, the screw conveying motor is at the bottom, and the flexible conveying motor is on the top;
2. 700kg/h grain hopper, stainless steel tube top, 1 meter high, stainless steel SUS304;
3. Mash tank, 2000L+25% head space,
1) A section of steam in the cylinder, equipped with a steam solenoid valve, a trap, and safety components,
2) Glass manhole door,
3) PT100 temperature probe is clamp style,
4) 1 exhaust fan,
5) The level gauge has a stainless steel sleeve,
6) With water mixing manifold;
7) 2 * 360 covering CIP ball washing clamp connection,
8) Pneumatic valve,
9) The wort inlet size is 2 inches,
10) Material water mixer,
11) Adjusting bolts,
4. Boiling /whirlpool tank, 2000L+25% head space
1) Two-stage steam, individually controlled, with steam solenoid valve, trap and safety components
2) Stir up, whirlpool inlet
3) Glass manhole door
4) 2 * 360 coverage CIP ball washing clamp connection
5) PT100 temperature probe is clamp style
6) Exhaust fan
7) Top radar level
8) The liquid level has a stainless steel sleeve
9) The wort inlet baffle is connected by a clamp
10) Adjust bolt
5. 5T/H mash pump, with frequency conversion, ABB motor; Danfoss VFD; 20M2 two-stage plate heat exchange; wort oxygenation-pipeline thermometer; 50L yeast addition tank; mash platform, punching plate, SUS304; IFM flow meter
6. Pneumatic valve, connected to mash tank, boiling/whirlpool tank and hot water tank; the mash outlet and boiling outlet are also equipped with pneumatic valves
Contact us now!
